Tyco Radiant Underfloor Heating 240 V Complete

FlexTherm Green Cable Surface XL 240 VAC Radiant Floor Heating System with Prova Flex-Heat+ Uncoupling Membrane and Your Choice of Thermostat

With its constant diameter at every length, the Green Cable Surface XL heating wire is the perfect complement to the Prova Flex-Heat+ uncoupling membrane for the easiest-to-install ultimate performance heated tile and stone underlayment system

Description

• Complete System includes Green Surface XL heating wire, one floor sensor, thermostat and Prova Flex-Heat+ uncoupling membrane for seating heat wire and providing the ultimate underlayment solution
• Choose a kit size for the area to be heated and the type of thermostat
• Easy Installation - no separate return wire to thermostat (one supply cold wire set)
• Entire system is compatible with ceramic and natural stone floor coverings
• Heating wire uses robust sheath with a constant diameter
• Energy savings up to to 28%*
• Free of electromagnetic fields**
• Does not dry the air or spread dust and germs
• Requires no maintenance
• Designed for installation in wet environments
• Use modified or fortified thin-set mortar of your brand choice and quality (good, better, best)
• Installation with modified thin-set mortar provides higher installation performance versus unmodified installs
• Will not rot or crack and is impervious to most substances.
• With Shear-Stress Control - membrane bridges cracks and provides an isolation layer to prevent cracking of tile surface.
• Can be laid over a variety of substrates.
• 25-year limited warranty
• 208 VAC systems also available special order - call for details

*In a room heated by a FLEXTHERM floor heating system.
**Based on the installation instructions included in the FLEXTHERM installation guide, the recorded EMF measurement is considered insignificant (between 0.25 mG and 0.5 mG).

 

It is recommended that you order additional Prova Flex-Heat+ to cover additional areas of your installation space that will not be heated. Installing the XL thickness Prova Flex-Heat+ over your entire space ensures consistent height and proper protection for stone and tile for heated and unheated regions. Consult the chart below to determine how much membrane is already included with your specific heating kit size:

240 VAC Heating and Coverage Specifications

FlexTherm Grn Surface XL Heat Wire Part #	Square Feet of Prova Flex-Heat+ included (3" spc)	SF Coverage for 3" spacing - primary or supplemental heat	Alt. Coverage* for 3.75" - 4" spacing supplemental heat layout	Wattage (W)	Amperage (A)	Length (ft)
HGS240L0031	10	9	11	113	0.5	31
HGS240L0049	15	13	16	176	0.7	149
HGS240L0063	19	17	21	228	1.0	63
HGS240L0089	26	24	30	322	1.3	89
HGS240L0111	33	30	37	403	1.7	111
HGS240L0134	39	36	45	484	2.0	134
HGS240L0157	46	30	38	403	2.4	157
HGS240L0178	51	47	59	645	2.7	178
HGS240L0200	58	53	66	725	3.0	200
HGS240L0222	64	59	73	806	3.4	222
HGS240L0258	74	68	84	934	3.9	258
HGS240L0291	83	76	95	1054	4.4	291
HGS240L0320	91	84	104	1159	4.8	320
HGS240L0352	100	92	115	1276	5.3	352
HGS240L0390	112	103	129	1413	5.9	390
HGS240L0418	118	109	136	1515	6.3	418
HGS240L0480	134	124	156	1739	7.3	480
HGS240L0503	143	132	165	1821	7.6	503
HGS240L0553	155	143	180	2003	8.4	553
HGS240L0632	178	164	205	2290	9.5	632
HGS240L0712	199	184	231	2577	10.7	712

* Alternative coverage intended primarily for floor surface warming where other room heat sources/vents exist. You will need to order additional Prova Flex-Heat+ for the expanded area. The primary spacing and coverage can serve as either primary or secondary room heating.

Green Cable Surface XL

Click Here to
Download
Instructions